TAB Traction Li-Ion

TAB Traction Li-Ion batteries are designed to deliver longer cycle life, reduction of the total ownership costs, higher productivity and faster charging and are completely maintenance free. TAB BMS (Battery Management System) allows you to monitor the status and health of the battery at any time.

Modules and cells that are used in our batteries are designed in accordance with IEC 62133-2:2017. Modules and cells are certified according to UN38.3.

Advantages of Lithium-Ion vs. Lead-Acid Batteries:

Compared with lead-acid, a lithium battery does not require any maintenance and produces no toxic emissions.
Fast (<2 hours) and flexible charging, opportunity charging and two-times longer battery life than lead-acid batteries will increase productivity of your equipment and will take your business to the next level of efficiency.

Lithium-Ion Batteries:
Operating time approx. 21-22 h
Fast/Opportunity charging time approx. 2-3 h

Lead-Acid Batteries:
Operating timeapprox. 8 h
Charging time/rest periods approx. 8 h

CHARACTERISTICS	Lead-Acid Batteries	TAB Lithium batteries
MAINTENANCE	Maintenance required Extra cost	No maintenance No extra cost
CHARGING TIME	8-10 hours 2 or more batteries per truck required for continuous operation	Less than 2 hours 1 battery per truck is enough for continuous operation
OPPORTUNITY CHARGING	No Lower fleet availability due to charging breaks	Yes 100% fleet availability
BATTERY LIFE	1500 charge/discharge cycles Periodic battery replacement	2000 charge/discharge cycles No need to replace batteries
DANGEROUS SUBSTANCES	Yes Battery room is required	No, environmentally friendly Safe and clean technology Battery room is not required
ELECTRICITY CONSUMPTION	Consumes 35% more energy Higher electricity costs	Consumes 35% less energy Lower electricity costs

TAB BMS (BATTERY MANAGEMENT SYSTEM)

Main Functions:

12V, 24V and 48V Single unit system
Master-Slave configuration for High voltage batteries
LCD Touch screen information display
Battery monitoring and protection
Safety improvement

Monitoring:

Cell voltage
Cell temperature
Cell resistance
Battery current
BMS temperature
SOC (State of Charge) calculation
High resolution current measurement

Control:

Safety devices
Pre-charge circuit
Standby mode
Sleeping mode

Balansing:

1.3A passive balancing per cell
100% cell availability

Prognostic:

SOH (State of Health) calculation
Remaining energy/capacity
Time until Full / Time until Empty

Protection:

Over-voltage
Under-voltage
Over temperature
Over current
Under temperature charge protection

Communication:

Galvanically isolated user defined multi-purpose digital input/output
Additional user defined relays and digital inputs/outputs on master-slave configurations
Galvanically isolated RS-485 communication
Galvanically isolated CAN with 100, 125, 250, 500, 1 MHz bit-rate selection
CAN to Charger communication

Custom Batteries for Various Applications:

Light EV
Cleaning machines
Cranes and lifts
Robots
Industrial drones
Trains
Utility vehicle
UAV
Boats
Mining equipment
Agriculture

INFORMAȚII TEHNICE